Setting up the Voyagoux Nomad Horizon locks

Step 1: Initial setting "0-0-0"

Set the lock to the initial position "0-0-0". This is the factory setting the lock comes with. Make sure all three digits are set to zero before continuing.

Step 1

Step 2: The zipper slider isn't locked in place

Make sure the zipper pull is not caught in the lock. The zipper pull must be free and not stuck so that the lock can be adjusted properly.

Step 2

Step 3: Press the red button

Take a pen or a thin object and use it to press the red button located next to the numbers. This button sets the lock to the programming mode.

Step 3

Step 4: Set the new combination

Keep the red button pressed down the entire time while setting the new combination. Do not release the red button while turning the dials.

Step 4

Step 5: Secure the assembly

After setting the desired combination, release the red button. Be sure to check that the new code works properly before locking the lock.

Step 5

Important tips

  • Make sure to remember your new code, or write it down and keep it in a safe place where only you have access to it.
  • Avoid simple combinations like "1-2-3" or "0-0-0" to ensure the security of your lock.